SC UPC Singlemode Pre-terminated Fiber Optic Field Assembly Connector
The SC/UPC fast connector are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub and a proprietary index-matching gel combine to offer an immediate low loss termination to either single-mode or multimode optical fibers. The Field Assembly Connector series are already a popular solution for optical wiring inside buildings and floors for LAN & CCTV applications and with the expansion of FTTH, is already proving itself to be the connector of choice by incumbents, municipalities, utilities & alternative carriers. Our Field Assembly Optical Connector series are now available in SC, LC, or FC variants, catering for 250um to 900um, and 2.0mm, 3.0mm diameter single mode and multimode fiber types, including Multi-mode 62.5/125um and Multi-mode 50/125um. The single-mode versions are available with SPC or APC ferrules.
Keyed Characteristics
1. Quick, simple and clean solution for terminating connectors.
2. Can be installed in within two minutes, including preparation time.
3. High success rate of connection.
4. Simple assembly process.
5. Factory polished reducing installation time.
6. Stable optical performance is achieved through its use of V-groove mechanical splice technology.
Cable Technical Datasheet
| No. | Items | Unit | Specification |
| Single-mode |
| 1 | Mode Field Diameter | 1310nm | μm | 9.2±0.4 |
| 1550nm | 10.4±0.5 |
| 2 | Cladding Diameter | μm | 124.8±0.7 |
| 3 | Cladding Non-Circularity | % | ≤0.7 |
| 4 | Core-Cladding Concentricity Error | μm | ≤0.5 |
| 5 | Coating Diameter | | μm | 245±5 |
| 6 | Coating Non-Circularity | | % | ≤6.0 |
| 7 | Cladding-Coating Concentricity Error | | μm | ≤12.0 |
| 8 | Cable Cutoff Wavelength | | nm | λcc≤1260 |
| 9 | Attenuation(max.) | 1310nm | dB/km | ≤0.4 |
| 1550nm | dB/km | ≤0.3 |
| 10 | Fiber Type | Corning SMF28-e |
Technical Parameter
| Cable Design |
| Fiber Count | 1 |
| Buffering Diameter | 900μm |
| Tight Buffer Type | Standard – strip up to 10cm or Easy strip |
| Tight Buffer Colour | White (standard) |
| Tensile Strength Elements and/or Armored Layer 1 | Aramid yarn |
| Outer Jacket Material | PVC/Flame-retardant, non-corrosive / low-smoke, zero-halogen (FRNC / LSZH) |
| Outer Jacket Colour | Yellow / Orange / Aqua |
| Outer Jacket Nominal Thickness | 0.35mm |
Application
• Allow optical continuity to be verified by use of visual fault locator (VFL);
• Fiber optic communication system and telecommunication networks;
• Fiber optic data transmission;
• CATV;
• Optical access network;
• Fibre to the Subscriber (FTTx) applications;
• Optical cable interconnection;
• Maintenance or emergency restoration of fiber networks;
• Repair and replacement requirements;
• Fiber optic equipment.
Hangalaxy provides fast fiber optical pre-installed connector works great, and Yes the connector can be screwed. Use it daily on our W&G Power meter for fibers.
Product Tags:
|
|
OS2 Fiber Optic Field Assembly Connector / Sc Upc Fiber Connector Singlemode Images
|
